Penerapan Manajemen Risiko Kecelakaan Kerja pada Proyek Penggantian Jembatan Tukad Ayung Denpasar, Bali
Main Article Content
Management of occupational accident risk involves systematic, planned, structured, and comprehensive efforts to mitigate the factors that contribute to the occurrence of work accidents. This study aims to examine the risk of work accidents in the Tukad Ayung Bridge replacement project, especially at the stage of installing concrete girders. Qualitative and quantitative data from primary and secondary sources were used, collected through observation, interviews, questionnaires, literature review, and documentation analysis. The Hazard Identification, Risk Assessment, and Risk Control (HIRARC) method is used for data analysis. The findings revealed 24 types of work accident risks at seven stages of concrete block installation in the project including the concrete girder preparation stage, girder truss making, erection (setting segmental girder), prestressed steel installation (strand), cabel strand stressing work, concrete girder tendon grouting, and diaphragm installation stage. The results of the risk analysis on the concrete girder installation work on the Tukad Ayung Bridge replacement project, are in the moderate category, which is as many as 12 risks. Furthermore, as many as 11 risks are included in the high category. Meanwhile, in the extreme category as much as 1 risk.
Irawan, Shandy, Panjaitan, Togar W. S., & Bendatu, Liem Yenny. (2015). Penyusunan Hazard Identification Risk Assessment and Risk Control (HIRARC) Di PT. X. Jurnal Titra, 3(1), 15–18.
Koreawan, Oky Agus, & Basuki, Minto. (2019). Identifikasi Bahaya Bekerja Dengan Pendekatan Hazard Identification Risk Assessment And Risk Control (Hirarc) Di PT. Prima Alloy Steel Universal. Prosiding SENIATI, 5(1), 161–165.
Mahendra, Roki. (2021). Pelaksanaan Perlindungan Kesehatan Dan Keselamatan Kerja Bagi Pekerja Di CV. Basit Eshan Abadi Berdasrkan Undang-undang No. 13 Tahun 2003 Tentang Ketenagakerjaan Di Desa Lipat Kain Selatan, Kecamatan Kampar Kiri, Kabupaten Kampar, Provinsi Riau. Universitas Islam Riau.
Martadinata, M. Indra, Febiyanti, Herlina, Suryan, Viktor, Pratama, Randa Agusta, & Nabilah, Hani Adhwa. (2021). Implementasi Safety Management System Di Bandar Udara Internasional Radin Inten Ii Pada Masa Pandemi Covid -19. Journal of Airport Engineering Technology (JAET), 2(01), 1–15. https://doi.org/10.52989/jaet.v2i01.44
Nadziliyah, Herlina, & Primasari, Niken Savitri. (2022). Analisis Fraud Hexagon Terhadap Financial Statement Fraud Pada Perusahaan Sektor Infrastruktur, Utilitas Dan Transportasi. Accounting and Finance Studies, 2(1), 21–39. https://doi.org/10.47153/afs21.2702022
Panjaitan, Marison. (2022). Sistem Manajemen Keselamatan Dan Kesehatan Kerja Pada Proyek Pembangunan Gedung Rumah Sakit Regina Maris Di Kota Medan.
Parashakti, Ryani Dhyan. (2020). Pengaruh Keselamatan Dan Kesehatan Kerja (k3), Lingkungan Kerja Dan Beban Kerja Terhadap Kinerja Karyawan. Jurnal Ilmu Manajemen Terapan, 1(3), 290–304.
Prabowo, Vandy Setia, & Sandora, Rina. (2017). Analisis Identifikasi Bahaya Pada Proyek Pembangunan Jalan Tol, Dengan Metode HIRARC dan Solusi Alternatif Menggunakan Benefit Cost Analysis (BCA). Conference on Safety Engineering and Its Application, 1(1), 171–175.
Putera, Ir I. Gusti Agung Adnyana, Dea, I. Gusti Agung Adnyana Putera, Dewi, Anak Agung Diah Parami, & Dewi, Anak Agung Diah Parami. (2017). Manajemen Risiko Keselamatan dan Kesehatan Kerja (K3) pada Proyek Pembangunan Jambuluwuk Hotel dan Resort Petitenget. Jurnal Spektran, 5(1). https://doi.org/10.24843/spektran.2017.v05.i01.p06
Ramadhan, Fazri. (2017). Analisis Kesehatan dan Keselamatan Kerja (K3) Menggunakan Hazard Identification Risk Assessment and Risk Control (HIRARC). Prosiding Seminar Nasional Riset Terapan| SENASSET, 164–169.
Saraswati, Ni Putu Yolanda, & Widodo, Slamet. (2019). Penerapan Metode HIRARC Keselamatan dan Kesehatan Kerja Pada Pekerjaan Land Clearing di Terminal Kijing Kabupaten Mempawah. Jurnal Teknik Sipil, 21(1), 74–84.
Soekiswara, Teguh Eko F. (2024). Faktor Kecelakaan Dan Keselamatan Kerja Pada Penggunaan Crane Di Proyek Konstruksi. Menara: Jurnal Arsitektur Dan Teknik Sipil, 12(1), 42–50.
Yalina, Fitri, & Sugiri, Tia. (2021). Pengaruh Implementasi Sistem Manajemen Keselamatan Konstruksi Terhadap Kinerja Proyek Pembangunan Flyover (Studi Kasus: Flyover Sultan Agung Tanjung Karang). Techno-Socio Ekonomika, 14(2), 87. https://doi.org/10.32897/techno.2021.14.2.664
