Produksi Bahan Bakar dari Limbah Plastik HDPE dan LDPE Menggunakan Metode Pirolisis
Main Article Content
The purpose of this study is to calculate the volume and composition of fuel produced from the production of fuel from polyethylene plastic waste per liter. Method: research using pyrolysis method with temperature 450-621°C without using catalyst, and quantitative analysis. Quantitative analysis using the GC-MS method. Result: Pyrolysis of 5 Kg HDPE waste produces 3.25 liters of naphtha, 0.85 liters of gasoline; diesel 0.325 liters; and activated carbon 18.06 grams. 5 Kg LDPE waste produces 500 mL naphtha, 2.9 liters of gasoline; diesel 0.1 liters; and 19 grams of activated carbon. Conclusion: Pyrolysis of 5 Kg HDPE waste produces 3.25 liters of naphtha; gasoline 0.85 liters; diesel 0.325 liters (88.86% total fuel), and activated carbon 18.06 grams; and 5 Kg LDPE waste produces 2.9 liters of gasoline; 0.1 liters of diesel (70.38% of total fuel), and 19 grams of activated carbon. The composition of fuel produced in pyrolysis of polyethylene plastic waste (HDPE and LDPE) in the form of naphtha, gasoline, and diesel and produces residues in the form of activated carbon.
Ali, M., & Ramadhan, A. (2010). Pengolahan Sampah Plastik menjadi Minyak menggunakan Proses Pirolisis. Skripsi Prodi Teknik Lingkungan, Fakultas Teknik Sipil dan Perencanaan ….
Arifin, MZainal. (2017). Dampak sampah plastik bagi ekosistem laut. Buletin Matric, 14(1), 44–48.
Desai, Sudhir B., & Galage, C. K. (2015). Production and analysis of pyrolysis oil from waste plastic in Kolhapur city. International Journal of Engineering Research and General Science, 3(1), 590–595.
Fitidarini, Noor Laily, & Damanhuri, Enri. (2021). Timbulan Sampah Styrofoam Di Kota Bandung Styrofoam Waste Generation In The City Of Bandung.
Hakim, Muhammad Zulfan. (2019). Pengelolaan dan pengendalian sampah plastik berwawasan lingkungan. Amanna Gappa, 111–121.
Hermawan, Sapto, Waluyo, Waluyo, Subekti, Rahayu, Astuti, Wida, Purwono, S. R., Sugandha, Wasis, Triwahyudi, Pius, & Nugroho, Asianto. (2020). Peningkatan Pemahaman Masyarakat Desa Daleman Terkait Penatakelolaan Sampah Berbasis Circular Economy. Prosiding Konferensi Nasional Pengabdian Kepada Masyarakat Dan Corporate Social Responsibility (PKM-CSR), 3, 607–615.
Juliastuti, Sri Rachmania. (2015). Pengolahan limbah plastik kemasan multilayer LDPE (Low Density Poly Ethilene) dengan menggunakan metode Pirolisis Microwave. Seminar Nasional Teknik Kimia" Kejuangan", 11.
Khan, M. Z. H., Sultana, M., Al-Mamun, M. R., & Hasan, M. R. (2016). Pyrolytic waste plastic oil and its diesel blend: fuel characterization. Journal of Environmental and Public Health, 2016.
Kuncowati, Kuncowati. (2019). Analisis Pengelolaan Sampah Di Kapal Dan Peran Awak Kapal Terhadap Pencegahan Pencemaran Laut Dari Kapal Di Pelabuhan Tanjung Perak Surabaya. Majalah Ilmiah Bahari Jogja, 17(1), 71–85.
Putra, Hijrah Purnama, & Yuriandala, Yebi. (2010). Studi pemanfaatan sampah plastik menjadi produk dan jasa kreatif. Jurnal Sains & Teknologi Lingkungan, 2(1), 21–31.
Ramadhani, Refna Sri. (2020). Analisis Tekno Ekonomi Pengelolaan Sampah Plastik Sebagai Bahan Baku Pembuatan Bata Plastik. universitas islam negeri sultan syarif kasim riau.
Shahreza, Mirza. (2018). Strategi Komunikasi Lingkungan yang Mendukung Keberlanjutan Komunitas Pengelolaan Sampah di Kota Tangerang Selatan. IPB University.
Sitorus, Rudi Hermansyah, & Siahaan, Asrin. (2021). Analisis Pemahaman Anak Buah Kapal Tentang Pengelolaan Sampah Di Atas Kapal Dalam Upaya Pencegahan Pencemaran Laut. Cybernetics: Journal Educational Research and Social Studies, 151–156.
Surono, Untoro Budi. (2013). Berbagai metode konversi sampah plastik menjadi bahan bakar minyak. Jurnal Teknik, 3(1), 32–40.
Yadav, Raj Kumar, & Tembhurne, Yogesh Kumar. (2016). Waste plastic fuel used in petrol engine. Technology, 7(1), 1–4.
