Penerapan Fmea untuk Mengurangi Tes Ulang pada Proses Pengujian Vitamin D di Laboratorium Pengujian PT. Tüv Nord Indonesia
Main Article Content
The purpose of this study is to analyze quality control in vitamin D testing using FMEA and fishbone diagrams. The type of research is applied research with a population in the form of retest data on vitamin D testing at PT TUV NORD Indonesia during the period January – December 2023. From the results of the pareto chart there are 6 causes of retest, then the highest percentage is analyzed using a fishbone diagram. Next, it was analyzed with FMEA to determine the priority scale so that the largest RPN value was obtained, namely not carrying out routine blender maintenance with a value of 245. And a 5W+1H analysis was carried out, so a proposal for improvement was obtained at the highest RPN value, namely carrying out maintenance planning on the equipment periodically.
Efendy, Nasrul. (2018). Dasar-Dasar Perawatan Kesehatan Masyarakat. Jakarta: EGC.
Etzel, Michael J., Walker, Bruce J., & Stanton, William J. (1997). Marketing. McGraw-Hill Companies.
Ilie, Gheorghe, & Ciocoiu, Carmen Nadia. (2010). Application of fishbone diagram to determine the risk of an event with multiple causes. Management Research and Practice, 2(1), 1–20.
Indrarespati, Rifaldy, Haekal, Jakfat, & Kholil, Muhammad. (2021). Analisa Risiko Operasional Persediaan Pada Gudang Bahan Baku UKM Makanan Ringan Metode FMEA. Penelitian Dan Aplikasi Sistem Dan Teknik Industri, 15(2), 220–229.
Iswanto, Adi, Rambe, M., Jabbar, A., & Ginting, Elisabeth. (2013). Aplikasi metode Taguchi Analysis dan failure mode and effect analysis (fmea) untuk perbaikan kualitas produk di PT. XYZ. Jurnal Teknik Industri USU, 2(2), 219330.
Kemenkes, R. I. (2021). Laporan Kinerja Kementrian Kesehatan Tahun 2020. Kementerian Kesehatan Republik Indonesia Tahun.
Muchtar, Masrudi. (2016). Etika Profesi dan Hukum Kesehatan. Yogyakarta: Penerbitan Tim Pustaka Baru.
Purnomo, H. (2004). Pengantar Teknik Industri, Edisi Kedua, Yogyakarta. Graha Ilmu.
Rahmadiana, M. (2012). “Komunikasi Kesehatan : Sebuah Tinjauan.” Jurnal Psikogenesis, 1(1), 88–94.
Setiawan, Eric Priambodo, & Puspitasari, Nia Budi. (2018). Analisis Kerusakan Mesin Asphalt Mixing Plant dengan Metode FMEA dan Cause Effect Diagram (Studi Kasus: PT Puri Sakti Perkasa). Industrial Engineering Online Journal.
Sulaiman, Endang Sutisna. (2021). Pemberdayaan Masyarakat di Bidang Kesehatan: Teori dan Implementasi. UGM PRESS.
Supartini, N. Nurlina, Kp, S., Supartini, N. Nurlina, & Kp, S. (2020). Panduan Pelayanan Kesehatan Lanjut Usia pada Era Pandemi Covid-19. Kementerian Kesehatan RI.
Syahrullah, Yudi, & Izza, Milenia Rahma. (2021). Integrasi FMEA dalam penerapan quality control circle (QCC) untuk perbaikan kualitas proses produksi pada mesin tenun rapier. Jurnal Rekayasa Sistem Industri, 6(2), 78–85.
Wang, Hanmin, Chen, Weiwen, Li, Dongqing, Yin, Xiaoe, Zhang, Xiaode, Olsen, Nancy, & Zheng, Song Guo. (2017). Vitamin D and chronic diseases. Aging and Disease, 8(3), 346.
